How does water get into a basement or crawl space?
Water usually enters at a low point: a wall crack or joint, a window well, a floor joint, a drain that backs up, or surface water that runs toward the house during a storm. Finding the route tells the crew what has to be closed before drying can hold.
Surface water is one common route. When rain runs toward the house faster than the ground and gutters can carry it away, the water finds the lowest openings, which are often window wells, door thresholds and the joint where a wall meets the floor. The technician looks at the outside of the house as well as the inside, because the outside shows where the water came from.
Drain backup and a failed sump are the other usual routes. A floor drain or a sewer line that cannot take a heavy flow sends water up through the lowest drain in the house, and a sump that stops keeping up leaves water to rise on its own. The crew notes which route it was, because a route left open will refill the lower level after the next heavy rain.
What does a crew check on the walls and floor after the water is out?
Foundation walls, floor joints and the base of any framing are checked for moisture and for signs that water is still moving through them. Readings are logged, so the homeowner knows which parts are dry and which need more time.
Walls are read from the floor upward, with a moisture meter at the base, where water sat longest. Concrete and block can hold moisture for a long time after the surface looks dry, so the technician checks each reading against a dry point on the same wall. Staining, a white crust or a damp patch that returns after drying are all noted, since each one points to water still moving through the wall.
Floor systems are checked from the surface and, where access allows, from below. A subfloor or joist that is still wet can keep the room humid after the floor covering is dry, so the technician checks the joists in a crawl space or the framing under a basement floor. The record from that check is what shows whether drying is finished.
Which things in a flooded lower level are usually lost?
Porous materials that soaked up water are the usual losses: carpet, pad, the bottom of drywall, insulation, stored cardboard and some furniture. Hard items that were only wet on the surface are often cleaned and kept.
Cardboard and paper are lost quickly once they are wet, and stored boxes are often the first thing a homeowner has to throw out. Carpet and pad are lost when the water was deep or stayed a long time. Drywall is removed from the bottom up to the point the water reached, and insulation that has soaked through is taken out, since it cannot be dried back to usable condition.
Hard items are cleaned and checked. Metal shelving, sealed tools and hard plastic bins that were only in the water's path can often be washed and dried. The technician makes the call on each item, and the homeowner is asked before anything is discarded. Photographs taken before items are moved help with any later question about what was lost.
What moves the scope and the price in a basement job?
The depth of the water, the size of the finished area, the number of walls affected, the entry route and access to the space are the main factors. The price is explained and approved before work starts, and no figure for it is given on this page.
Depth and area matter most. Water that covers the floor of a small unfinished area is a smaller job than water that reaches the top of the baseboards across a finished room. Each wall adds readings and drying time, and a finished space adds the flooring, trim and drywall that must be checked. The crew measures and records those before the equipment goes in.
Access and age decide the rest. A crawl space with low clearance limits where equipment can be placed, and a basement full of stored contents takes time to clear before drying can begin. Older houses in the area can have different wall and floor systems than the newer homes that make up most of Hampton's housing, so the technician notes the construction first. The price is explained and approved before work starts.
What can a homeowner do before the crew arrives?
Stay out of standing water, keep power off to the lower level if that can be done safely, and move dry items up off the floor. Do not pump or dig at the source yourself.
Move dry items onto a table or shelf, and set aside papers, photographs and documents that matter. Lift shoes, boxes and small electronics out of shallow water once the power is off. Keep a record of what was there, since a photograph is the simplest proof of the loss if a question comes up later.
Avoid the common mistakes. Do not wade into deep water, do not run a generator in the basement or near its opening, and do not use a household vacuum on standing water. A homeowner who can see the source, such as a window well or a drain, should note it and tell the crew. Leave the pumping, cutting and drying to the technician.