Why does old plaster take longer to dry than drywall?
Plaster is dense and holds water in its body, and the lath behind it traps moisture between the strips. The water moves more slowly out of plaster than out of gypsum board, so the readings take longer to settle.
Plaster is a mass of lime or gypsum over a base, and it does not wick water out the way paper-faced board does. A wall can look dry at the surface while the plaster behind it still holds water. Lath is slats of wood that the plaster keys into, and the gaps between the slats can trap water against the framing.
Drying plaster is a matter of patience and airflow. The technician checks readings at the lath, the framing and the plaster edge rather than only at the surface. The wall is not closed or painted until those readings have stayed level across several checks, because a closed wall with wet lath will show stains and cracks later.
Can plaster and lath be saved after water damage?
Often, yes. Plaster that is still bonded to the lath can usually be dried and stabilized. Plaster that has come away from the lath or crumbles in the hand is repaired section by section or replaced, depending on how much is affected.
Loose plaster is pinned or secured with fasteners and adhesive while it is wet, so it dries back against the lath rather than falling away. Cracks are cleaned out and filled, and the plaster is brought back to a level surface. The aim is to keep the original wall where it is sound and to repair only where the damage is real.
Lath that has softened or rotted is replaced in sections, and the new lath is set to match the old spacing as closely as possible. A technician explains which parts are kept and which are replaced, so the homeowner knows what the finished wall will look like before the patch is made.
What happens to old floors and crawl spaces after water?
The floor is dried from above and below where access allows, and the crawl space is treated as part of the same job. Solid boards that have cupped are often sanded once dry, and boards that have rotted are replaced.
Crawl space water can wick into the sill and the joists and then into the floor above. The crawl is checked first for standing water, and then the wood around the foundation is read with a moisture meter. Ventilation is kept open so air can move through, and the sills and joists are dried before the floor above is closed.
Solid floors are checked for level and for soft spots once they are dry. A board that has cupped from the top can flatten once the moisture leaves it, but a board that has rotted from below is replaced. The homeowner is told which boards are likely to flatten and which are not, so there are no surprises when the floor is sanded and finished.
What moves the price up or down for an older home repair?
The construction of the house, the amount of plaster and lath involved, the access to the crawl space and the kind of flooring all move the price. The price is explained and approved before work starts, and this page gives no figure.
Plaster repair takes longer than board repair, because each patch is matched by hand and dried more slowly. A wall that is plaster over lath needs more cutting, more protection and more finishing than a drywall wall of the same size. The number of rooms with plaster and the number of walls that must be kept intact both change the work.
A crawl space that is tight, wet or hard to reach adds handling time, and so does a floor that has to be taken up and re-laid. Original trim and doors add protection and careful removal. The homeowner is walked through those points before the job begins, so the reasons for the time spent are clear.
How does the work respect the look of an older house?
The work keeps original surfaces where they can be kept, repairs with materials that suit the period of the house, and tells the homeowner which repairs will show. Modern shortcuts are avoided where they would change the house.
Original trim, doors and floors are protected, dried carefully and returned when they can be. A technician avoids painting over original wood or plaster with coatings that would seal the wall and trap moisture. Where materials are replaced, the replacement is chosen to match in color, grain and profile as closely as possible.
The homeowner should understand that some repairs will look new for a while. Fresh plaster and new boards are visible until they age and are finished to match. The technician explains which repairs will blend in over time and which will need the finish to be matched by hand.